Stretch Wrapper preventive maintenance checklist
If you look after Stretch Wrapper equipment, you already know the failures: carriage jams, film breaks and turntable drive wear.
This checklist gives you 4 ready-to-use PM tasks with frequency, trade, estimated hours, step-by-step procedure, parts, safety requirements and pass/fail criteria. Import it into your CMMS or print it for the technician.
Where to get the Stretch Wrapper checklist
This set ships inside the Maintenance Planner Toolkit with the other 10 asset classes. Want to try the format first? The belt conveyor checklist is free, direct CSV, no signup.
Get the toolkit, $99What is in the checklist
| PM task | Frequency | Pass / fail |
|---|---|---|
| Monthly stretch wrapper service Mechanical, 1.0 h, downtime: Yes | Monthly | Pre-stretch ratio within spec; clean cut and clamp every cycle |
| Weekly stretch wrapper operator check Operations / Mechanical, 0.3 h, downtime: No | Weekly | Carriage rollers clean and turning; safety devices stop the machine; film applies without tearing |
| Quarterly stretch wrapper drive and carriage service Mechanical, 1.5 h, downtime: Yes | Quarterly | Chain deflection within spec; turntable runs true; carriage stops at set heights |
| Annual stretch wrapper inspection and calibration Mechanical / Electrical, 2.0 h, downtime: Yes | Annual | Film force within 10 percent of setpoint; all safeties function; no abnormal gear wear |
Sample procedure: Monthly stretch wrapper service
MonthlyMechanical1.0 h
- LOTO.
- Clean film carriage rollers, check pre-stretch gear and belts.
- Inspect turntable drive chain and tension.
- Check film clamp and cutter blade.
- Lubricate mast carriage chain.
- Check photo-eye for load height.
- Test cycle with load.
Parts: Cutter blade, belts, chain lube. Safety: LOTO; blade hazard.
Want the rest?
The Stretch Wrapper checklist is one of 11 asset classes in the Maintenance Planner Toolkit: 39 PM tasks, an asset register template, a parts min/max calculator, a weekly KPI dashboard, a compliance calendar and a 90-day setup guide. Built by a working maintenance planner, not a software vendor.
See the full toolkit, $99